面部运动单元检测研究综述

面部运动单元检测旨在让计算机从给定的人脸图像或视频中自动检测需要关注的运动单元目标。经过二十多年的研究，尤其是近年来越来越多的面部运动单元数据库的建立和深度学习的兴起，面部运动单元检测技术发展迅速。首先，阐述了面部运动单元的基本概念，介绍了已有的常用面部运动单元检测数据库，概括了包括预处理、特征提取、分类器学习等步骤在内的传统检测方法；然后针对区域学习、面部运动单元关联学习、弱监督学习等几个关键研究方向进行了系统性的回顾梳理与分析；最后讨论了目前面部运动单元检测研究存在的不足以及未来潜在的发展方向。     

350MW机组采暖集水箱液位自动控制的完善与实现

辽宁东方350 MW机组采暖集水箱液位自动控制,投产时设计是采用磁翻板就地液位显示加液位接点输出液位高低等信号,配合电气疏水控制系统实现水位自动控制回收系统。运行8年来,该系统经常发生由于液位接点动作故障致使液位自动控制不正常,只能靠人工定期就地控制。为了解决这个问题,从根源上进行了分析,温度是影响原磁翻板液位控制系统正常运行的主要原因,结合原设备的实际状况,在不投入大量改造的基础上又能够解决问题的前提下,利用压力液位的关系特性,提出了相应的改造方案,在实施中得到了非常好的效果,不但设备运行良好同时带来了不菲的经济效益。     

核算前移在冶炼企业优化成本控制中的应用

针对国际黄金价格的走低,黄金冶炼企业如何在激烈的市场竞争中寻求更大的利润空间,优化成本控制显得尤为重要。以某冶炼厂为例,阐述核算前移在优化企业成本控制中的应用,以达到降本增效的目的,实现企业利润的最大化。     

碘量法—原子吸收光度法测金的方法对比

总结了目前金矿矿山企业实际生产过程中金含量的测定方法的种类及简单的测定原理,并具有针对性的介绍了实际生产中常用的两种测定方法—活性炭富集碘量法和活性炭富集原子吸收法。因两种测定方式中前期的试样处理及富集过程较为相似,于是将两种测定方法的原理,操作过程,数据结果对比分析等方面做了较为详细的讨论。对两种方法在实际操作中存在的问题给予分析,具有较高的实际生产指导意义。     

某纯电动车高压关键零部件布置方案研究

以某款A0级纯电动汽车研发为例,介绍高压关键零部件在整车上的布置方案和在布置过程中应当注意的问题,包括动力电池、动力总成、高压配电盒、电机控制器、车载充电机布置方案、电动空调压缩机以及其他关键零部件的合理布置方案,为后期车型开发提供参考.     

Fluoride-mediately solvothermal synthesis and tunable photocatalytic selectivity of urchin-like ZrO2 hollow microspheres

Photocatalysts often show excellent performances on the basis of their surface state of exposed faces with high reactivity, but unfortunately surfaces of this type are usually concealed into the interior of crystals for their high surface energy. We report here a possibility that for fluorine-terminated surfaces of monoclinic ZrO₂, these higher-energy surfaces could be retained and exposed. Urchin-like ZrO₂ hollow microspheres (UZHS) composed of nanoribbons with exposed (010) facets are obtained through a fluoride mediately solvothermal method. We prove the stabilization effect of fluorine adsorption on (010) facets by density functional theory calculations. More interestingly, UZHS exhibit tunable photocatalytic selectivity in dye degradation. The fluorinated UZHS exhibit good performances both on decomposing Congo red (CR) and methylene blue, while the surface-modified UZHS by calcination only favor decomposition of CR.     

Fabrication and characterizations of Cr3+-doped ZnGa2O4 transparent ceramics with persistent luminescence

0.5 at.% Cr:ZnGa₂O₄ precursor was synthesized by the co-precipitation method with nitrates as raw materials, using ammonium carbonate as the precipitant. Low-agglomerated Cr:ZnGa₂O₄ powders with an average particle size of 43 nm were obtained by calcining the precursor at 900℃ for 4 h. Using the powders as starting materials, 0.5 at.% Cr:ZnGa₂O₄ ceramics with an average grain size of about 515 nm were prepared by presintering at 1150℃ for 5 h in air and HIP post-treatment at 1100℃ for 3 h under 200 MPa Ar. The in-line transmittance of 0.5 at.% Cr:ZnGa₂O₄ ceramics with a thickness of 1.3 mm reaches 59.5% at the wavelength of 700 nm. The Cr:ZnGa₂O₄ ceramics can be effectively excited by visible light and produce persistent luminescence at 700 nm. For Cr:ZnGa₂O₄ transparent ceramics, the brightness of afterglow was larger than 0.32 mcd/m² after 30 min, which is far superior to that of Cr:ZnGa₂O₄ persistent luminescence powders.